Home > Designing, Others > How to Play and Pause CSS Animations with CSS Custom Properties

How to Play and Pause CSS Animations with CSS Custom Properties

January 21st, 2021 Leave a comment Go to comments

Let’s have a look CSS @keyframes animations, and specifically about how you can pause and otherwise control them. There is a CSS property specifically for it, that can be controlled with JavaScript, but there is plenty of nuance to get into in the details. We’ll also look at my preferred way of setting this up which gives lots of control. Hint: it involves CSS custom properties.

The importance of pausing animations

Recently, while working on the CSS-powered slideshow you’ll see later in this article, I was inspecting the animations in the Layers panel of DevTools. I noticed something interesting I’d never thought about before: animations not currently in the viewport were still running!

Maybe it’s not that unexpected. We know videos do that. Videos just go on until you pause them. But it made me wonder if these playing animations still use the CPU/GPU? Do they consume unnecessary processing power, slowing down other parts of the page?

Inspecting frames in the Performance panel in DevTools didn’t shed any more light on this since I couldn’t see “offscreen”-frames. But, when I scrolled away from my “CSS Only Slideshow” at the first slide, then waited and scrolled back, it was at slide five. The animation hadn’t paused. Animations just run and run, until you pause them.

So I began to look into how, why and when animations should pause. Performance is an obvious reason, given the findings above. Another reason is control. Users not only love to have control, but they should have control. A couple of years ago, my wife had a really bad concussion. Since then, she has avoided webpages with too many animations, as they make her dizzy. As a result, I consider accessibility perhaps the most important reason for allowing animations to pause.

All together, this is important stuff. We’re talking specifically about CSS keyframe animations, but broadly, that means we’re talking about:

  1. Performance
  2. Control
  3. Accessibility

The basics of pausing an animation

The only way to truly pause an animation in CSS is to use the animation-play-state property with a paused value.

.paused {
  animation-play-state: paused;
}

In JavaScript, the property is “camelCased” as animationPlayState and set like this:

element.style.animationPlayState = 'paused';

We can create a toggle that plays and pauses the animation by reading the current value of animationPlayState:

const running = element.style.animationPlayState === 'running';

…and then setting it to the opposite value:

element.style.animationPlayState = running ? 'paused' : 'running';
CodePen Embed Fallback

Setting the duration

Another way to pause animations is to set animation-duration to 0s. The animation is actually running, but since it has no duration, you won’t see any action.

But if we change the value to 3s instead:

CodePen Embed Fallback

It works, but has a major caveat: the animations are technically still running. The animation is merely toggling between its initial position, and where it is next in the sequence.

Straight up removing the animation

We can remove the animation entirely and add it back via classes, but like animation-duration, this doesn’t actually pause the animation.

.remove-animation {
  animation: none !important;
}

Since true pausing is really what we’re after here, let’s stick with animation-play-state and look into other ways of using it.

Using data attributes and CSS custom properties

Let’s use a data-attribute as a selector in our CSS. We can call those whatever we want, so I’m going to use a [data-animation]-attribute on all the elements where I’d like to play/pause animations. That way, it can be distinguished from other animations:

<div data-animation></div>

That attribute is the selector, and the animation shorthand is the property where we’re setting everything. We’ll toss in a bunch of CSS custom properties *(*using Emmet-abbreviations) as values:

[data-animation] {
  animation:
    var(--animn, none)
    var(--animdur, 1s)
    var(--animtf, linear)
    var(--animdel, 0s)
    var(--animic, infinite)
    var(--animdir, alternate)
    var(--animfm, none)
    var(--animps, running);
}

With that in place, any animation with this data-attribute will be perfectly ready to accept animations, and we can control individual aspects of the animation with custom properties. Some animations are going to have something in common (like duration, easing-type, etc.), so fallback values are set on the custom properties as well.

Why CSS custom properties? First of all, they can be read and set in both CSS and JavaScript. Secondly, they help significantly reduce the amount of CSS we need to write. And, since we can set them within @keyframes (at least in Chrome at the time of writing), they offer new and exiting ways to work with animations!

For the animations themselves, I’m using class selectors and updating the variables from the [data-animation]-selector:

<div class="circle a-slide" data-animation></div>

Why a class and a data-attribute? At this stage, the data-animation attribute might as well be a regular class, but we’re going to use it in more advanced ways later. Note that the .circle class name actually has nothing to do with the animation — it’s just a class for styling the element.

/* Animation classes */
.a-pulse {
  --animn: pulse;
}
.a-slide {
  --animdur: 3s;
  --animn: slide;
}

/* Keyframes */
@keyframes pulse {
  0% { transform: scale(1); }
  25% { transform: scale(.9); }
  50% { transform: scale(1); }
  75% { transform: scale(1.1); }
  100% { transform: scale(1); }
}
@keyframes slide {
  from { margin-left: 0%; }
  to { margin-left: 150px; }
}

We only need to update the values that will change, so if we use some common values in the fallback values for the data-animation selector, we only need to update the name of the animation’s custom property, --animn.

Example: Pausing with the checkbox hack

To pause all the animations using the ol’ checkbox hack, let’s create a checkbox before the animations:

<input type="checkbox" data-animation-pause />

And update the --animps property when checked:

[data-animation-pause]:checked ~ [data-animation] {
  --animps: paused;
}
CodePen Embed Fallback

That’s it! The animations toggle between played and paused when clicking the checkbox — no JavaScript required.

CSS-only slideshow

Let’s put some of these ideas to work!

I‘ve played with the

-tag a lot recently. It’s the obvious candidate for accordions, but it can also be used for tooltips, toggle-tips, drop-downs (styled -look-a-likes), mega-menus… you name it. It is the official HTML disclosure element, after all. Apart from the global attributes and global events that all HTML elements accept,

has a single open attribute, and a single toggle event. So, like the checkbox hack, it’s perfect for toggling state — but even simpler:

details[open] {
  --state: 1;
}
details:not([open]) {
  --state: 0;
}

I decided to do a slideshow, where the slides change automatically via a primary animation called autoplay, and each individual slide has its own unique secondary animation. The animation-play-state is controlled by the --animps-property. Each individual slide can have it’s own, unique animation, defined in a --animn-property:

<figure style="--animn:kenburns-top;--index:0;">
  <img src="some-slide-image.jpg" />
  <figcaption>Caption</figcaption>
</figure>

The animation-play-state of the secondary animations are controlled by the --img-animps-property. I found a bunch of nice Ken Burns-esque animations at Animista and switched between them in the --animn-properties of the slides.

Pausing an animation from another animation

In order to prevent GPU overload, it would be ideal for the primary animation to pause any secondary animations. We noted it briefly earlier, but only Chrome (at the time of writing, and it is a bit shaky) can update a CSS Custom Property from an @keyframe animation — which you can see in the following example where the --bgc-property and --counter-properties are modified at different frames:

CodePen Embed Fallback

The initial state of the secondary animation, the --img-animps -property, needs to be paused, even if the primary animation is running:

details[open] ~ .c-mm__inner .c-mm__frame {
  --animps: running;
  --img-animps: paused;
}

Then, in the main animation @keyframes, the property is updated to running:

@keyframes autoplay {
  0.1% {
    --img-animps: running; /* START */
    opacity: 0;
    z-index: calc(var(--z) + var(--slides))
  }
  5% { opacity: 1 }
  50% { opacity: 1 }
  51% { --img-animps: paused } /* STOP! */
  100% {
    opacity: 0;
    z-index: var(--z)
  }
}

To make this work in browsers other than Chrome, the initial value needs to be running, as they cannot update a CSS custom property from a @keyframe.

Here’s the slideshow, with a “details hack” play/pause-button — no JavaScript required:

CodePen Embed Fallback

Enabling prefers-reduced-motion

Some people prefer no animations, or at least reduced motion. It might just be a personal preference, but can also be because of a medical condition. We talked about the importance of accessibility with animations at the very top of this post.

Both macOS and Windows have options that allow users to inform browsers that they prefer reduced motion on websites. This enables us to reach for the prefers-reduced-motion feature query, which Eric Bailey has written all about.

@media (prefers-reduced-motion) { ... }

Let’s use the [data-animation]-selector for reduced motion by giving it different values that are applied when prefers-reduced-motion is enabled*:*

  • alternate = run a different animation
  • once = set the animation-iteration-count to 1
  • slow = change the animation-duration-property
  • stop = set animation-play-state to paused

These are just suggestions and they can be anything you want, really.

<div class="circle a-slide" data-animation="alternate"></div>
<div class="circle a-slide" data-animation="once"></div>
<div class="circle a-slide" data-animation="slow"></div>
<div class="circle a-slide" data-animation="stop"></div>

And the updated media query:

@media (prefers-reduced-motion) {
  [data-animation="alternate"] {
   /* Change animation duration AND name */
    --animdur: 4s;
    --animn: opacity;
  }
  [data-animation="slow"] {
    /* Change animation duration */
    --animdur: 10s;
  }
  [data-animation="stop"] {
    /* Stop the animation */
    --animps: paused;
  }
}

If this is too generic, and you prefer having unique, alternate animations per animation class, group the selectors like this:

.a-slide[data-animation="alternate"] { /* etc. */ }

Here’s a Pen with a checkbox simulating prefers-reduced-motion. Scroll down within the Pen to see the behavior change for each circle:

CodePen Embed Fallback

Pausing with JavaScript

To re-create the “Pause all animations”-checkbox in JavaScript, iterate all the [data-animation]-elements and toggle the same --animps custom property:

<button id="js-toggle" type="button">Toggle Animations</button>
const animations = document.querySelectorAll('[data-animation');
const jstoggle = document.getElementById('js-toggle');

jstoggle.addEventListener('click', () => {
  animations.forEach(animation => {
    const running = getComputedStyle(animation).getPropertyValue("--animps") || 'running';
    animation.style.setProperty('--animps', running === 'running' ? 'paused' : 'running');
  })
});

It’s exactly the same concept as the checkbox hack, using the same custom property: --animps, only set by JavaScript instead of CSS. If we want to support older browsers, we can toggle a class, that will update the animation-play-state.

CodePen Embed Fallback

Using IntersectionObserver

To play and pause all [data-animation]-animations automatically — and thus not unnecessarily overloading the GPU — we can use an IntersectionObserver.

First, we need to make sure that no animations are running at all:

[data-animation] {
  /* Change 'running' to 'paused' */
  animation: var(--animps, paused); 
}

Then, we’ll create the observer and trigger it when an element is 25% or 75% in viewport. If the latter is matched, the animation starts playing; otherwise it pauses.

By default, all elements with a [data-animation]-attribute will be observed, but if prefers-reduced-motion is enabled (set to “reduce”), the elements with [data-animation="stop"] will be ignored.

const IO = new IntersectionObserver((entries) => {
  entries.forEach((entry) => {
    if (entry.isIntersecting) {
      const state = (entry.intersectionRatio >= 0.75) ? 'running' : 'paused';
      entry.target.style.setProperty('--animps', state);
    }
  });
}, {
  threshold: [0.25, 0.75]
});

const mediaQuery = window.matchMedia("(prefers-reduced-motion: reduce)");
const elements = mediaQuery?.matches ? document.querySelectorAll(`[data-animation]:not([data-animation="stop"]`) : document.querySelectorAll('[data-animation]');

elements.forEach(animation => {
  IO.observe(animation);
});

You have to play around with the threshold-values, and/or whether you need to unobserve some animations after they’ve triggered, etc. If you load new content or animations dynamically, you might need to re-write parts of the observer as well. It’s impossible to cover all scenarios, but using this as a foundation should get you started with auto-playing and pausing CSS animations!

CodePen Embed Fallback

Bonus: Adding to the slideshow with minimal JavaScript

Here’s an idea to add music to the slideshow we built. First, add an audio-tag:

<audio src="/asset/audio/slideshow.mp3" hidden loop></audio>

Then, in Javascript:

const audio = document.querySelector('your-audio-selector');
const details = document.querySelector('your-details-selector');
details.addEventListener('toggle', () => {
  details.open ? audio.play() : audio.pause();
})

Pretty simple, huh?

I did a “Silent Movie” (with audio)-demo here, where you get to know my geeky past. ?

CodePen Embed Fallback

The post How to Play and Pause CSS Animations with CSS Custom Properties appeared first on CSS-Tricks.

You can support CSS-Tricks by being an MVP Supporter.

Categories: Designing, Others Tags:
  1. No comments yet.
  1. No trackbacks yet.
You must be logged in to post a comment.